HONEYWELL V800C 1052, 24V Standing Pilot Combination Gas Control Valve

Description

HONEYWELL V800C 1052, 24V Standing Pilot Combination Gas Control Valve.
Product Overview:
Used on gas fired standing pilot appliances with 30 mV thermocouple. Includes a manual gas valve, safety shutoff, single millivoltage automatic operator, pressure regulator, pilot gas filter and flow adjustment, pressure tapping, and thermocouple connector.
Product Features:
Includes pilot flow adjustment screw
Easy to install, adjust and service; all adjustments and connections are accessible from top of control
Add separate energy cutoff (ECO) where codes call for dual safety shutoff
Complete safety shutoff on pilot flame failure
LITE-RITE (OFF-PILOT-ON) lighting sequence
ECO connector for V800 models
Product Specifications:
Description: 24 Vac Standing Pilot Gas Valve with 3/4 in. x 3/4 in. inlet\outlet, step opening and Full Rate: 3.5 in. wc; Step Setting: 0.9 in. wc pressure regulator setting
Type: Single Stage
Ignition Type: Standing Pilot
Type of Gas: Natural
Inlet/Outlet Size (in.): 3/4 in. x 3/4 in.
Body Pattern: Straight-through, multi-tapped with 1/2 in. right and left outlets plugged
Opening Characteristics (standard, step): Step Opening
Capacity @ 1 in. p.d.: 335,000 BTU/hr
Pressure Ratings (psi): 1/2 psi
Pressure Ratings (kPa): 3.5 kPa
Pressure Regulator Setting (psi): Full Rate: 3.5 in. wc; Step Setting: 0.9 in. wc
Pressure Regulator Setting (kPa): Full Rate: 0.87 kPa; Step Setting: 0.22 kPa
Pilot Gas Outlet: Compression fitting for 1/4 in. OD tubing
Pressure Tapping: 1/8 in. NPT with plug
Electrical Connections: Combination screw and 1/4 in. male quick connects
Electrical Ratings: 24 Vac
Frequency: 60 Hz
Anticipator Setting: 0.2A
Temperature Range (F): 32 F to 175 F
Temperature Range (C): 0 C to 79 C
Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically
Dimensions (in.): 4 3/4 in high x 4 1/16 in. wide x 3 3/16 in. deep
Dimensions (mm): 121 mm high x 103 mm wide x 81 mm deep
Includes: Two 3/4 x 1/2 in.; One 1/2 x 3/8 in. Reducer Bushing/Adapters
Approvals, American Gas Association IAS: AGA Design Certified; File No. L2025003, CGA Design Certified; File No. L2025003, UL Component Recognized
Approvals, Underwriters Laboratories Inc: UL Component Recognized