Limiter Sensor Cable 20M 1000W 2000W G2 Solar Wind Power On Grid Tie Inverter

Description

Limiter Sensor Cable 20M 1000W 2000W G2 Solar Wind Power On Grid Tie Inverter
Description
Cable Length:20M
Please noted: The Current limiter(sensor) can be compatible with 4 models inverter:
SUN-WAL-LCD 1000W;
SUN-WAL-LCD 2000W ;
SUN-1000 GTI2-WAL-LCD;
SUN-2000 GTI2-WAL-LCD.
The Grid tie inverter integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.
Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power.
Select the external limiter mode(please choose the mode "with sensor"),inverter need a external limiter module working with it.
Limit Mode:External limiter and Internal limiter are settable,
Limit mode+External limiter both selected means work under external limiter mode.
Limit mode+Internal limiter both selected means work under external limiter mode.
LCD back light:Select it,Lcd will always on.Unselect it,Lcd will auto turn off after about 10s without any action on lcd button.Press any of the button to light lcd again.
Remote Num:while using with wifi plug for monitoring,set by 1.While using with the WIFI-RTU(one rtu can monitoring multiple inverters),set monitored inverter numbers.
Bat or solar limited current mode:This function is usable while using with battery. the settled voltage will be the cut off voltage,this means while battery discharged to the settled voltage point or below setted point,inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set  is 0.1V/step.
Reboot voltage: This setting voltage means while battery charged back, the inverter will auto restart after voltage reached the setting point. It convenient the user and make the function very flexible. Set is 0.1V/Step.
Battery and solar limited power mode: At this working mode, cut off voltage setting is same as 6.4,and the power setting is the maximum output power of the inverter.by this setting, user can limit the output power manually.
Package Included
1 x
20M Limiter Sensor Cable