Singerman Laboratories Rust Remover for Concrete - Makes 1 Gallon Mixed

Description

Singerman Laboratories Rust Stain Remover for Concrete is the most effective cleaner in the marketplace for removing rust stains from concrete and natural stone.  Makes the concrete or stone surface look like new.  Frankly, we've been unable to find another product that actually removes rust stains from concrete, except those that are so harsh that they remove the stain by also removing the concrete.  It is supplied as a white powder which is mixed with water just before application, forming a clear gel. The rust stain remover is spread on the surface and left for one to fifteen minutes, depending on the severity of the stain; the stain disappears without scrubbing. Rinse thoroughly to prevent redeposition of the stain. Will not harm grass or other vegetation.
Derusts 60 sq ft
Effectiveness
Makes the concrete or stone surface look like new. Frankly, we've been unable to find another product that actually removes rust stains from concrete, except those that are so harsh that they remove the stain by also removing the concrete.
Will not damage concrete or stone surfaces
Works in minutes
Safe and pleasant for you and the environment
Will not harm grass or other vegetation
Easy to use
just mix with water to form a clear gel
stain disappears without scrubbing
Neither toxic nor corrosive
Non-hazardous
Odorless
Non-flammable
No fumes
Biodegradable; will not harm the environment
Completely water soluble
No phosphorus
Components are not regulated
How to Use Singerman Laboratories Rust Remover
Clean dirt from surface to be derusted.
Add Singerman Laboratories Rust Remover powder concentrate to water as per label directions. Stir until a clear liquid gel is formed.
Immediately spread generously on rust stain. (After mixing with water, rust removing ability declines over time. It loses about half of its activity in four hours.)
Note:
Always clean a small area first to test how long to leave the product on the surface. Start with just a few minutes to gauge the time needed for removal
Let stand fifteen minutes or longer, depending on the severity of the stain.  In most cases, simply hose away completely, with a forceful stream of water.  Repeat if needed and apply a little brushing action, if necessary.
FAQ
Q. My concrete is new. Can I use Singerman Laboratories Rust Remover to remove a fertilizer stain?
A. Yes, if your concrete is more than a month old. (WE RECOMMEND TESTING ON A SMALL AREA FIRST, AS YOU SHOULD WITH ANY CLEANER.)
Q. Can I use Singerman Laboratories Rust Remover on colored concrete?
A. Yes, we have had good results removing rust from colored concrete. (WE RECOMMEND TESTING A SMALL AREA FIRST.)
Q. How much will a gallon mix cover?
A. Approximately 60 sq. ft. depending upon the surface and the severity of the stain.
Q. How do I apply Singerman Laboratories Rust Remover?
A. With a simple paint brush, or for larger areas, use a long-handled scrub brush.
Q. Can I use Singerman Laboratories Rust Remover to clean fertilizer rust stains from the inside of my swimming pool?
A. Yes, but you must first drain the pool below the rust stain line. (BE CAREFUL NOT TO GET THE REMOVED RUST RESIDUE IN THE POOL OR A RUST STAIN MAY REAPPEAR IN ANOTHER AREA OF THE POOL)
Q. Will Singerman Laboratories Rust Remover harm my grass?
A. No, Singerman Laboratories Rust Remover will not harm grass or vegetation.