SUNTEC R642N Beckett 2233U Solenoid Valve Oil Burner Pump Beckett Wayne Carlin

Description

SUNTEC
R
642NL Solenoid Valve
for Oil Burner Pump
Mounts to the Pump
SHUT-OFF VALVE INSTALLATION:
A. GENERAL
The shut-off valve should be installed in accordance with local and national
safety codes. (See Figure 3 – wiring diagrams)
B. INSTALLATION – R valve (See Figure 1)
1. Remove old thread sealant from pump nozzle port plug and ensure that
the plug face is free from nicks and burrs.
2. Rotate valve module as shown in Figure 1 or according to the burner
manufacturer’s recommendations if applicable.
3. Assemble one gasket to nozzle screw and insert nozzle screw through
valve module. Assemble one gasket over threaded end of nozzle screw.
4. Attach valve module to the pump by threading the nozzle screw into the
pump nozzle port. Tighten nozzle screw 8-12 ft. lbs.
5. Apply thread sealant to nozzle line fitting and install fitting into valve
module.
DO NOT USE TEFLON OR SIMILAR TYPE TAPE AS A THREAD
SEALANT.
For additional information please go to:
The manufacturers website
Please note some of the items require professional knowledge and skills to handle or installed. Thomas New Parts is not responsible for any damage or injuries resulted from mishandling of professional products. All HVACR equipment should be serviced/installed by certified professionals only. Please let us know if you have any concerns or questions.