Tools Steel Back Plate For Rotary Table to Mount Chuck Machine Tools

Description

(DIA 65 MM- M12 X 1)
QUALITY 65 MM DIAMETER BACK PLATES FOR 3" /4" ROTARY TABLES TO MOUNT CHUCKS ON THEM
MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1
M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
(DIA 65 MM - M14 X 1)
QUALITY 65 MM DIAMETER BACK PLATES FOR 3" /4" ROTARY TABLES TO MOUNT CHUCKS ON THEM
MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M14 X 1
M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
(
DIA 80 MM -RECESS 55 FOR 3''/4'' ROTARY TABLE)
QUALITY 80 MM TOOL STEEL BACK PLATES FOR 3"/ 4" ROTARY TABLE TO MOUNT A 3 JAW SELF CENTERING CHUCK ON THEM
M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY. DRILLED IN A MANNER THAT THEY FIT BOTH 3 AS WELL 4 SLOT ROTARY TABLE.
THE OTHER SIDE OF THE PLATE HAS A SMALL LOCATING SPIGOT THAT SITS IN THE CENTER OF THE ROTARY TABLE. IT MEASURES 13.9 MM
RECESS 55 MM. 3 x M6 THREAD DRILLS .SUPPLIED WITH 3 X T NUTS + BOLTS.
(DIA 80 MM-RECESS 55 MM (FOR HV4/ HV6 ROTARY TABLE)
QUALITY 80 MM DIAMETER BACK PLATES FOR HV4/ HV6 ROTARY TABLES TO MOUNT CHUCKS ON THEM
MADE OF TOOL STEEL. PRECISELY MACHINED. SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
HAS A MT2 EXTENSION SPIGOT ON OTHER SIDE THAT SITS IN THE MT2 CENTER BORE OF THE ROTARY TABLE.
RECESS 55 MM. 3 X 6 MM THREAD DRILLS. M6 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.
3 X M6 COUNTER BORED. PLATE IS DRILLED IN A MANNER THAT IT CAN FIT TO BOTH A 3 AS WELL AS 4 SLOT ROTARY TABLE.
(DIA 100 MM- RECESS 70 MM)
QUALITY 100 MM DIAMETER BACK PLATES FOR HV4/ HV6 ROTARY TABLES TO MOUNT 3 JAWS SELF CENTERING ON THEM
MADE OF TOOL STEEL. PRECISELY MACHINED. APPROPRIATE SIZE 3 X T NUTS + BOLTS ARE SUPPLIED ALONG.
HAS A MT2 EXTENSION SPIGOT ON OTHER SIDE THAT SITS IN THE MT2 CENTER BORE OF THE ROTARY TABLE.
RECESS 70 MM. 3 X 6 MM THREAD DRILLS. M6 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.
PLATE IS DRILLED IN A MANNER THAT IT CAN FIT TO BOTH A 3 AS WELL AS 4 SLOT ROTARY TABLE.
(DIA 125 MM- RECESS 95 MM)
QUALITY 125 MM DIAMETER TOOL STEEL BACK PLATES FOR ROTARY TABLES TO MOUNT CHUCKS ON THEM
MADE OF TOOL STEEL. PRECISELY MACHINED. M8 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.
SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE'S T SLOT.